- Видео 857
- Просмотров 4 996 539
StationRoadSteam
Добавлен 25 фев 2008
5 inch gauge Polly V 2-6-0T
A 5 inch gauge Polly V. One of the largest locomotives in the Polly range we rate them highly - their size, weight and reliability makes them ideal for club passenger hauling.
In good condition throughout, the boiler has had hydraulic and steam tests with new certification issued - a new fusible plug was fitted at this time. On test the engine steamed freely and ran well, as expected from this well-proven design.
Offered with 12 months warranty, set of firing irons and a starter kit of coal and oil. We would be more than happy to give half a day's instruction on the steaming, running and disposal of the engine to a new owner if required.
www.stationroadsteam.com/5-inch-gauge-polly-v-2-6-0t-s...
In good condition throughout, the boiler has had hydraulic and steam tests with new certification issued - a new fusible plug was fitted at this time. On test the engine steamed freely and ran well, as expected from this well-proven design.
Offered with 12 months warranty, set of firing irons and a starter kit of coal and oil. We would be more than happy to give half a day's instruction on the steaming, running and disposal of the engine to a new owner if required.
www.stationroadsteam.com/5-inch-gauge-polly-v-2-6-0t-s...
Просмотров: 554
Видео
5 inch gauge Stirling 8 foot Single
Просмотров 55219 часов назад
A 5 inch gauge Stirling 8 foot single, Patrick Stirling's supremely elegant design for the Great Northern Railway, a successful class of express locomotives built over a twenty-five year period in the latter part of the nineteenth century. They played a key role in the "Race to the North" series of runs which took place over the summers of 1895/96, pitting the Great Northern against their rival...
5 inch gauge GWR 4-6-0 "Cockington Manor"
Просмотров 874День назад
www.stationroadsteam.com/5-inch-gauge-gwr-4-6-0-cockington-manor-stock-code-12011/ #livesteam #modelengineering #modelrail
2 1/2 inch gauge steam crane, stock code 12026
Просмотров 1,3 тыс.14 дней назад
A 2 1/2 inch gauge steam crane, complete with match truck and purpose built oak display case. To say that we're a bit taken with this one is a major understatement - few things have been so closely pored over and played with as this crane, it spent much of one afternoon last week lifting wheel castings up and down! A beautifully made thing, the fit and finish of machined parts is excellent, the...
5 inch gauge GWR 45XX 2-6-2T, stock code 11789
Просмотров 45214 дней назад
www.stationroadsteam.com/5-inch-gauge-gwr-45xx-2-6-2t-stock-code-11789/
Horizontal mill engine
Просмотров 37214 дней назад
www.stationroadsteam.com/horizontal-mill-engine-in-glass-case-stock-code-11949/ #stationaryengine #steam #engineering
5 inch gauge LNER B1 4-6-0 'Springbok'
Просмотров 58014 дней назад
5 inch gauge LNER B1 4-6-0 "Springbok" www.stationroadsteam.com/5-inch-gauge-lner-b1-4-6-0-springbok-stock-code-10413/c #modeltrains #modelengineering #livesteam
3 1/2 inch gauge Canterbury & Whitstable Railway 0-4-0
Просмотров 46714 дней назад
www.stationroadsteam.com/3-12-inch-gauge-canterbury-lamb-stock-code-12013/ #modeltrains #livesteam #modelengineering
5 inch broad gauge ''Iron Duke'' 2-2-2-2
Просмотров 88214 дней назад
www.stationroadsteam.com/3-12-inch-gauge-broad-gauge-iron-duke-2-2-2-2-stock-code-12008/ #modeltrains #livesteam #modelengineering
5 Inch Gauge Polly V 2-6-0T
Просмотров 63221 день назад
www.stationroadsteam.com/5-inch-gauge-polly-v-2-6-0t-stock-code-11810/ #modeltrains #modelengineering #livesteam
6 inch Scale Savage "Little Samson" Traction Engine
Просмотров 1,5 тыс.Месяц назад
6 inch Scale Savage "Little Samson" Traction Engine
Horizontal mill engine, stock number 11869
Просмотров 926Месяц назад
Horizontal mill engine, stock number 11869
New 5 inch gauge Feldbahn FC5 0-6-0, works number 1445
Просмотров 919Месяц назад
New 5 inch gauge Feldbahn FC5 0-6-0, works number 1445
5 inch gauge LNER B1 No.8308 "Klipspringer"
Просмотров 1,1 тыс.Месяц назад
5 inch gauge LNER B1 No.8308 "Klipspringer"
7 1/4 inch narrow gauge Hunslet 0-4-0ST
Просмотров 1,2 тыс.Месяц назад
7 1/4 inch narrow gauge Hunslet 0-4-0ST
1/10 Scale British mk4 Female Tank
Просмотров 1,1 тыс.2 месяца назад
1/10 Scale British mk4 Female Tank
5 inch gauge four cylinder Pacific
Просмотров 2,4 тыс.2 месяца назад
5 inch gauge four cylinder Pacific
7 1/4 inch gauge 0-4-2T "Tom Rolt"
Просмотров 1,4 тыс.2 месяца назад
7 1/4 inch gauge 0-4-2T "Tom Rolt"
4 1/2 inch scale Burrell agricultural
Просмотров 9022 месяца назад
4 1/2 inch scale Burrell agricultural
2 Inch Scale Burrell Gold Medal Tractor
Просмотров 9512 месяца назад
2 Inch Scale Burrell Gold Medal Tractor
Station Road Steam works open day 2024
Просмотров 8892 месяца назад
Station Road Steam works open day 2024
Are you planning to do an fc7/10.25" version of this in the future? Very interested in one Matt
Yes, two of the current batch of 8 "Estate range" locomotives are being built to this outline
Beautiful little engine :)
That's a lot of power.
I'm in love...
Just, yes. Beautiful steam locomotive.
Surprised that is 7 1/4, engine looks superb!
A proper .engineering job'.
Magic
She goes well and looks beautiful. Almost sounds like a full size steamer
who in the hell disliked this?!
Would love to somehow get this monster back to Oz what a Beauty
Impressive!
Magnificent!!
So nice
What a simply Gorgeous Machine! Excellent Work! She's a Greyhound!
Lovely! Your driver has no fear anyway!
Very nice engine. Thanks for the video. This looks like "Part 2". Is there a Part 1 that shows the preparation for pulling? Don't you have to do something, cutting or collapsing the expansion, roll, bead, at the other end before you start pulling? I would like to see what actually happens in the smoke chamber too. Looks like a pipe tape you screw in. Too dark in there to see. It looks like a lot of work, and fun though. Rbs
This is the complete operation. If the tubes were beaded at the firebox end (not that common in full size, rare in miniatures) then we'd grind the ends off, otherwise they're simply pulled out from the front - there is no need to collapse the ends. The hardened mandrel has a coarse taper thread which bites into the tube end - we wind it in tightly then back it off a little before pulling, otherwise it can be difficult to removed later.
Fantastic!
Oh that is nice
Maravilhoso!
Brilliant! :D
A very nice tone. Not too high, not to low!
Lovely.
Such a nice running and looking loco!
Nice. :)
Stunning!
Like the locomotives and the railway is also Beautiful
its so statisfying to look at when it drives
This one i saw yesterday at Leek/NL : A great engine by any means
Boys Thanks.
It's a Garratt from RENFE. Built by Babcock & Wilcox in Bilbao. Nice!!👍👍👍
Nice thanks for sharing. Cheers
Absolutely perfect!
Who makes the hooter that's on there? It gives off a lovely sound
TheSkyWright This was a whistle we'd got in stock, it's a small full-sized one rather than for a model - don't know who made it. Sounds nice and just about the right size for the engine.
Blimey, that's quite impressive! Puts my simplex to shame haha
Very nice, great video. Cheers
Wow that smoth
Yes, we currently have a batch of four engines in build, two 10 1/4 inch gauge and two flycrank 7 1/4 inch gauge - very similar to the one you see here only bigger. They are around a half ton in working order, just under six feet long, 150psi working pressure.
I hear you guys are going to produce a 10 1/4 engine. Is this true and would you be able to do this sort if thing to it to make it FC7 1/4?
What a real beauty she is ! I really like her ! Do you make her as a production model ? If so please tell me how much money I have to save . cheers Joe
Super Kanal, klasse Aufnahmen! (fantastic channel!)
Love it!
I've put up a video of the event too. Thanks for attending!
Beautiful locomotive, I feel a mid life crisis coming on !
Such a beautiful machine!!!
That is a beautiful machine!!!
Is that a RENFE 2-8-2 - 2-8-2?
What a beautiful loco! (like all GWR engines)
That's a really nice one!
It's a twin cylinder boiler feed pump